Category Archives: SKIER Rig Accessories

SKIER Micro Chip

If you don't need a large Cheese board, now you have better choice : SKIER Micro Chip!

It is the lightest and strongest accessories that can lock on 15mm standard rod and  it is flat to cross the rods and become a basement to lock quick release.There is 1/4" and 3/8" screw on the Chip, if you put it aside of the DSLR cage, it can attach your mixer, quick release on it.

There are 3 1/*4" and 2 3/8" screw holes in the Micro Chip, thus you can attach magic arm or any other 1/4" and 3/8" equipments on it directly. The best of all, it become smaller and lighter than SKIER Cheese Board.

 

Specification : 
 
Size : 7*3.5*3.5 (L*W*H, cm)
Thinnest : 0.8 cm
Weight : 70g
 
 
When you cross the rods, it can lock quick release directly.

 
You can fix SKIER Micro Chip aside on the DSLR cage to lock Mixer or magic arm directly.

 

 

SKIER Cinema Support Kit Plus

 

SKIER Cinema Support Kit Plus is simple device can fit with 15mm standard rods system to become a rig's quick release basement. It can adjust both height and width of camera position to the right position you want. The quick release plate is long 7.5cm with Arca-Swiss mode, it can change the camera center of gravity easily. Photographers can attached your own quick release plate on the bottom to assemble to your own tripod.  

 
Features :
  • Simple basement for 15mm standard rods system
  • Flexible of Camera position
  • Attached your own quick release plate on the bottom acceptable 

Specification : 
Size : 13*13*8 (L*W*H, cm)
Vertical adjust range : 2 cm
Horizontal adjust range : 1.5 cm 
Quick release plate included : 7.5 cm
Weight : 370g

Skier Motor Ring Stage Series

 

ABK3006 Motor Ring Stage 30cm
ABK4006 Motor Ring Stage 40cm
ABK5006 Motor Ring Stage 60cm

With Motor Ring Stage, you can choose manual or electric mode. It have independent switch, when you use the electric mode, you can stop the turning or change the turning direction by your hand.

Model Size(cm) Load Capacity(kg) Turning speed(circle/
sec)
Motor Ring Stage
30cm
30x30x5.5 50 60
Motor Ring Stage
40cm
40x40x5.5 50 90
Motor Ring Stage
60cm
60x60x5.5 80 120

SKIER RIGHT ANGLE connector

Specification

5.5(w)X5.5(H)x2(D)cm 58g

We improve the connector A and B to make the rod at the same flat. Read more »

Cinema Support Kit (Quick release)

 

Better and easily adjust the position of DSLR camera! Read more »

15mm to 19mm mount

We used 15mm rod base and 19mm rod base for change up two different size of rods.

Tripod Base Kit

If you want to fit on tripod easily when you used your own rig, this is the best choice !

The tripod base have 1/4 and 3/8 screw holes, you can fit any kind of quick release plate on it.

SKIER Vertical Connector

Change balance kit become vertical model.

 

Quick Release Plate

We have 75mm, 100mm, 150 Quick release plate for choose.

Read more »

SKIER Base Extension Kit

Read more »

This is 1 Page,Total 4 Pages1234